How to operate the LED strip PCB separator machine:
As customers have higher and higher technical requirements for depaneling, we continues to upgrade products and use the best parts to achieve the ultimate in equipment. At the same time, we insist on making machines that are superior in cost-effectiveness and affordable to customers.
Led light strip PCB separator machine is mainly used to cut a whole piece of glass fiber board, copper substrate, FR4 board, and aluminum substrate with V groove into small strips. It is a good helper for the electronics industry. The price is also affordable. And, it's very simple. Please see below steps:
1. Plug in the power first, press the power switch. You will see that the light of the switch is on.
2. Because the boards are different. Therefore, the knife can be adjusted up and down. When using it for the first time, adjust the distance between the knife and the board.
3. After adjusting, first check whether the blade is rotating, then start cutting after seeing the rotation.
4. The machine is quite safe, so there is no need to worry about scratching your hands.
5. Drive the light bar from left to right, and you will see that the round knife will drive the board until cutting is completed.
6. Unplug the power supply when you are not using it. The cutters are often sprayed with lubricating oil to prolong their life.
We specializes in depaneling equipment and have a complete, high-tech and high-quality system. Several years of experience in R&D and innovation have enabled our team to design a high-end depaneling machine for customers according to their needs. Assist to improve the production efficiency and reduce the damage in the customer's factory.
Contactpersoon: Ms. Amy
Tel.: +86-752-6891906
